压铸模具模温机,淮安油温机,苏州油温机

2019-10-24 12:27   1107次浏览
价 格: ¥ 9800

1、温度控制器(如右温度控制器

图)采用触模式内储、自动演算、可靠可控制在±2℃内,省电35%以上;

2、两组电热管,可单独使用或共同启用;

3、加温及冷却时间快速,温度稳定;4、电热筒等采用不锈钢材质;

5、保护及故障指示系统完善;

1. Temperature controller (such as right temperature controller)

图)采用触模式内储、自动演算、可靠可控制在±2℃内,省电35%以上;

Figure) it adopts contact mode for internal storage, automatic calculation, accurate and reliable control within ± 2 ℃, saving more than 35% power;

2、两组电热管,可单独使用或共同启用;

2. Two sets of electric heating pipes can be used separately or jointly;

3、加温及冷却时间快速,温度稳定;4、电热筒等采用不锈钢材质;

3. The heating and cooling time are fast and the temperature is stable; 4. The electric heating cylinder is made of stainless steel;

5、保护及故障指示系统完善;

5. Perfect safety protection and fault indication system;

苏州凌仕兰工业设备有限公司

地址:江苏 苏州 昆山 玉山镇 模具工业园区

联系:张经理

手机:18351662265

电话:0512-57459895

微信: